Manufactured between the years of 1989 - 1989
Engine
Service Items
Lubricants
Engine oil capacity is approximately 3.8 Litres, Sterndrive oil capacity is approximately 1.8 Litres
-
25W/40 Engine Oil 4.7 Litre (Not available to customers outside the UK)£48.41 (inc VAT)£40.34 (ex VAT)View Product Add
-
25W/40 Synthetic Blend Oil 4L - Genuine Quicksilver (Not available to customers outside the UK)£58.31 (inc VAT)£48.59 (ex VAT)View Product Add
-
2-4-C Multi-purpose Lubricant with PTFE - 14oz for Standard Grease Gun - Genuine£26.95 (inc VAT)£22.46 (ex VAT)View Product Add
-
GL5 75W/90 Synthetic Gear Oil - 1 Litre - Replacement (Not available to customers outside the UK)£23.23 (inc VAT)£19.36 (ex VAT)View Product Add
-
GL5 75W/90 Synthetic Gear Oil - 5 Litre - Replacement (Not available to customers outside the UK)£110.40 (inc VAT)£92.00 (ex VAT)View Product Add
-
Awaiting
ImageHigh-Performance Exteme Grease 8oz (227g)£20.17 (inc VAT)£16.81 (ex VAT)View Product Add
Cooling System
-
Exhaust Riser to Downpipe Bellows - Lower - (2 required per engine)£33.98 (inc VAT)£28.32 (ex VAT)View Product Add
Fuel System (Engine)
-
21-Micron Fuel Filter for OMC Filter Heads - Replacement£16.07 (inc VAT)£13.39 (ex VAT)View Product Add
-
10-Micron Fuel Filter for OMC Filter Heads - Replacement£12.00 (inc VAT)£10.00 (ex VAT)View Product Add
-
Fuel Lift Pump - Flange ID 60032 - Filter Housing 60mm Tall£203.98 (inc VAT)£169.98 (ex VAT)View Product Add
-
Lift Pump Filter - Paper Type - Lift Pump Filter - Paper Type£20.72 (inc VAT)£17.27 (ex VAT)View Product Add
-
Quickstor Fuel Stabiliser - 355ml (12oz) - Genuine - - Treats approx 50 Imperial Gallons£23.50 (inc VAT)£19.58 (ex VAT)View Product Add
Optional Fuel System Components
For additional types of Fuel Filters & Elements, please visit the Racor & Separ sections of our Website. These can be found under the "Accessories" heading on our Home Page.
-
Fuel Filter Kit with 1/4" Ports - Aluminium Head (Short Filter) 21 micron for Bulkhead Mounting£36.00 (inc VAT)£30.00 (ex VAT)View Product Add
-
Barbed Hose Tail for 3/8" ID Hose for Fuel Filter Assembly - Straight£7.20 (inc VAT)£6.00 (ex VAT)View Product Add
-
Barbed Hose Tail for 3/8" ID Hose for Fuel Filter Assembly - 90 Deg£9.60 (inc VAT)£8.00 (ex VAT)View Product Add
-
Fuel Filter (10 Micron) - Replacement -100mm (3-15/16") Long - - for Bulkhead Mounting£12.59 (inc VAT)£10.49 (ex VAT)View Product Add
-
10-Micron Fuel Filter - Replacement - 110mm (4-3/8") Long£12.59 (inc VAT)£10.49 (ex VAT)View Product Add
Ignition System
Electrical System
-
Temperature Sender 1/2"-14 - Spanner Size 7/8" - 1-7/8" Long£43.09 (inc VAT)£35.91 (ex VAT)View Product Add
Zinc Anodes - Seawater Use
-
Zinc Anode - Forward Cavitation Plate - Replacement£29.84 (inc VAT)£24.87 (ex VAT)View Product Add
-
Zinc Disc Anode - 4" 1kg - for Trim Tabs (Optional)£20.40 (inc VAT)£17.00 (ex VAT)View Product Add
Power Trim Assembly
Propeller Shaft
Seal Kits
Repair Items
-
U J Cross Piece - Replacement - (2 required per drive)£66.88 (inc VAT)£55.73 (ex VAT)View Product Add
-
Awaiting
ImageHigh-Performance Exteme Grease 8oz (227g)£20.17 (inc VAT)£16.81 (ex VAT)View Product Add
Chemicals
Please note: It is NOT possible to ship most liquids by air. Aerosols can ONLY be purchased by customers in England, Scotland and Wales.
-
Quickstor Fuel Stabiliser - 355ml (12oz) - Genuine - - Treats approx 50 Imperial Gallons£23.50 (inc VAT)£19.58 (ex VAT)View Product Add
-
*AEROSOL* Fogging Oil Spray (12oz) 340gm - Genuine (for use when laying up) (Shipping restrictions apply - see above)£22.99 (inc VAT)£19.16 (ex VAT)View Product Add
Tools & Manuals
A Series Vortex Aluminium Propellers - Three Blade
The following Propellers are suitable for Cobra 400 Drives with 4-1/4" Gearcase
Apollo Stainless Steel Propellers - Standard Three Blade
The following Propellers are suitable for Cobra 400 Drives with 4-1/4" Gearcase
-
13-3/8 x 15 RH S/S Propeller - 3-Blade (Hub Kit required)£216.00 (inc VAT)£180.00 (ex VAT)View Product Add
-
13-3/8 x 15 LH S/S Propeller - 3-Blade (Hub Kit required)£216.00 (inc VAT)£180.00 (ex VAT)View Product Add
-
13-1/4 x 17 LH S/S Propeller - 3-Blade (Hub Kit required)£216.00 (inc VAT)£180.00 (ex VAT)View Product Add
-
13-1/8x19 LH S/S Propeller - 3-Blade (Hub Kit required)£216.00 (inc VAT)£180.00 (ex VAT)View Product Add
-
13x21 RH S/S Propeller - 3-Blade (Hub Kit required)£216.00 (inc VAT)£180.00 (ex VAT)View Product Add
-
13x21 LH S/S Propeller - 3-Blade (Hub Kit required)£216.00 (inc VAT)£180.00 (ex VAT)View Product Add
Accessories
-
Safety Switch - Sierra Marine Works - Coiled Lanyard£31.20 (inc VAT)£26.00 (ex VAT)View Product Add
-
Battery Master Switch - Sierra Marine Works - 12V/100A Continuous (12V/500A for 10 seconds)£20.40 (inc VAT)£17.00 (ex VAT)View Product Add